An easy to use module that detects MIDI note on / note off messages for a single specific note and outputs gate and velocity signals when that note is received via its MIDI IN socket.
A typical application would be to trigger a particular sound when let’s say the note G2 is sent from your DAW. To do this patch Voltage Modular’s MIDI FROM HOST socket to MIDI IN, click on the LEARN button and send a G2 note from your DAW. Then any subsequent G2 notes will output the gate and associated velocity from GATE OUT and VELOCITY OUT.
Optionally a second MIDI signal fed to the TEACH IN socket can be used to dynamically set which note to detect.
A couple of built-in VCAs allow you to use the velocity information to control the level of a mono or stereo source if required.